2024 Kaufman Trailers 90,000 GVWR 42 ft. Base

Information

2024 Kaufman Trailers 90,000 GVWR 42 ft.

Kaufman Trailers Standard four bolster Log Trailer is built with a 24” deep, high tensile, fully fabricated main beams frame and full depth cross-members at each bolster. Our attention to detail and quality materials are the best in the industry! Frame flanges are heat treated 130 KSI with 80 KSI high tensile webbing. Standard suspension is a heavy duty, underslung, 4-spring Hutchens H-9700. A popular feature of this trailer is the low ride height at the rear. With the underslung suspension, this trailer provides much more stability and eliminates the feared sway when rounding turns and rocking through the woods therefore ensuring you years of service. We also offer the same suspension in the traditional overslung mode. Two popular optional suspensions are also available for a nominal up charge. These are a Watson single point or Ridewell air ride suspension.

Photos

Highlights

  • Claremont, Nuevo Hampshire
  • 2024
  • Kaufman Trailers
  • 90,000 GVWR 42 ft. Base
  • Crosspiece: 3 in. Channel | Centers: approx. 16 in. | Tongue: Hi-Yield Fully formed 3/8" thick fifth wheel plate sitting in reinforced fabricated main frame gooseneck beams
  • Available
  • Deck: 102" in.

Specifications

  • 2024
  • Kaufman Trailers
  • 90,000 GVWR 42 ft.
  • Base
  • Other
  • Deck: 42'-0" Main-frame plus 3'-0" heavy duty bumper and grapple bar assembly
  • Deck: 102" in.
  • Crosspiece: 3 in. Channel | Centers: approx. 16 in. | Tongue: Hi-Yield Fully formed 3/8" thick fifth wheel plate sitting in reinforced fabricated main frame gooseneck beams
  • SAE 2" Kingpin (20" Kingpin setting)
  • 2-25,000 lb. axles (5" round, 5/8" wall thickness)
  • (2) - 24" nominal Main-frame full length beams, fabricated with 130 KSI high tensile flanges and 80 KSI high tensile webs.
  • 2
  • 90,000 lbs
  • DOT approved lighting, US made sealed wiring harness, LED lights
  • 11R24.5
  • Ramps: 66" Spring assist Ramps standard, 96" Hydraulic ramps available | Tie Downs: (6) - 4" winches with 30'-0" straps | Toolbox: (2) - piano hinge lid toolboxes over fifth wheel | Jack: 6" x 4" tubing | Toolbox: Chain box with lockable toolbox | Side Rail: 5" x 5" x 96" tall Standards with 24" bolster to standard gusset
  • Floors: 4" x 10" Bolsters with continuous formed cap plate on log bearing surface for added durability
  • 10 hole steel disc / hub piloted
  • All wheel 16.5" x 7" air brakes, automatic slack adjusters, and 2S/1M ABS, Spring brakes on all axles
  • 2-25,000 lb. axles (5" round, 5/8" wall thickness)
  • Hutchens H-9700 Heavy duty suspension