2024 Kaufman Trailers 40 Ton – Detachable Gooseneck Trailer – Deck On Base

Information

2024 Kaufman Trailers 40 Ton – Detachable Gooseneck Trailer – Deck On

At 17,500 lbs. empty weight, and a 20” fully loaded deck height, the 30 ton model is set up with a capacity to weight ratio that can haul those permitted loads that are too tall and heavy for the typical flatbed and therefore bring top dollar, while still being light enough that you can pick up those backhauls that any flatbed would snag. The 40 ton bumps up your capacity by 20,000 lbs. while only increasing you empty weight by 1,000 lbs. The 40 Ton also allows the option to add that 3rd flip axle so you can bridge those heavier machines. When you start figuring your break even $/mile rate, you will quickly see that this trailer doesn’t just make “cents”, it will make you dollars.

The gooseneck on Kaufman’s Detachable Gooseneck Commercial Trailers is hydraulic powered, self-lifting, and self-aligning. It always slides easily into the V-Shaped alignment trough which is included on all our lowboy trailers. Our hydraulic controlled truck rest eliminates the need to manually block the neck during the detachment process. The custom built heavy duty hydraulic cylinders are made in the U.S. and provide the perfect combination of power and convenience. Our increased cylinder stroke means you will be able to raise the trailer chassis as high as 16” – 20” off the ground depending on fifth wheel height. The easily adjustable heavy duty hinged compression block assembly provides approximately four inches of ride height adjustment depending on the length of the gooseneck. We offer multiple gooseneck lengths that are available in 6” increments. We can help you find the perfect length neck to fit your truck.

Photos

Highlights

  • Claremont, Nuevo Hampshire
  • 2024
  • Kaufman Trailers
  • 40 Ton – Detachable Gooseneck Trailer – Deck On Base
  • Crosspiece: 3 in. Channel | Centers: approx. 16 in. | Ramp Runners: 4 in. Channel | Tongue: Hydraulic, removable, non-ground bearing gooseneck with 3 position adjustable load blocks and 85" - 107" available swing clearances. Comes standard set-up for wet line.
  • Available
  • Deck: 102" (Expandable to 126" with outriggers)

Specifications

  • 2024
  • Kaufman Trailers
  • 40 Ton – Detachable Gooseneck Trailer – Deck On
  • Base
  • Gooseneck
  • Deck: 29' well standard
  • 20" (fully loaded)
  • Deck: 102" (Expandable to 126" with outriggers)
  • Crosspiece: 3 in. Channel | Centers: approx. 16 in. | Ramp Runners: 4 in. Channel | Tongue: Hydraulic, removable, non-ground bearing gooseneck with 3 position adjustable load blocks and 85" - 107" available swing clearances. Comes standard set-up for wet line.
  • SAE 2" Kingpin (16" Kingpin Setting)
  • 2 - 25,000 lb. axles (5" round, 5/8" wall thickness) with Flip Prep included.
  • Four cambered main beams, fabricated with 100 KSI (T1) and 80 KSI high tensile steel.
  • 2
  • 98,500 lbs. (Capacity 80,000 lbs. in 16 ft. span or greater)
  • Sealco US made sealed wiring harness, lifetime LED lights, amber strobe kit standard
  • 255/70 R22.5 LRH
  • Ramps: 45” Wood Filled Sliding | Tie Downs: Forged D-rings | Toolbox: 20" x 42" Lockable Lid Toolbox | Jack: 12,000 lb. drop foot | Floors: Diamond plate | Toolbox: Chain box with lockable toolbox | Fenders: Load bearing high tensile steel fenders over the tires. | Tailgate: One piece tailgate with super duty screw latch | Side Rails: 12" Fabricated | Lower Deck: 29' well length | Upper Deck:120” Long x 101.5” Wide, Oak Decking, D-Rings on Side-rail
  • Floors: 2" oak flooring (Center Decking Included) | Finish: Sherwin Williams Premium Acrylic Urethane over a Premium Two Part Epoxy Primer
  • 10 hole steel disc / hub piloted (Aluminum Wheel Options)
  • All wheel 16.5" x 7" air brakes, automatic slack adjusters, and 4S/2M ABS
  • 2-25,000 lb. axles (5" round, 5/8" wall thickness)
  • Air Ride Suspension
  • HD safety chains